DESIGNING YOUR CUSTOM BUTTONS

Designing your Custom Buttons (Celluloid)

Please send us a picture of your logo, or any idea that you would like to see transformed into a custom button design. We accept images in any PC format. You can also fax or email us a sketch or drawing or feel free to start from scratch by contacting one of our friendly customer service representatives. One of our highly trained computer graphic artists will immediately begin working on your custom designed buttons and will forward a full color image via email for your review. We will revise your custom buttons design artwork until you are completely satisfied. Please remember that here at Buttons-4-Less.com we never charge for artwork and revisions.

When trying to decide on the size of the custom buttons design you would like to order, please consider the illustration below. Sometimes you may need to go to the next size up when you factor in the bleed areas of the button. Please note the working area of the button below:

The 4 Button Areas:

1. Working Area
   We recommend that all art and copy stay within this area.
   
   
2. Face of Button
   Art should not touch this area of the button unless it is bleeding off the edge.
   
   
3. Die Cut/Bleed Line -
   All art that bleeds/wraps must extend to this line. This line must print for accurate cutting.
   
   
4. Tagline
   Typesetting will be done on the curl in the bleed area by Buttons-4-Less to insure proper location.

**See Illustration Below for Details**

• 500 dpi resolution recommended (300 dpi minmum)
  
  
• Ensure a 1/2" Bleed (1/4" per side of button)
  
  
• CMYK color (most accurate color printing)
  
  
• Must be in a PC format

• All fonts must be converted to outlines
  
  
• Ensure a 1/2" Bleed (1/4" per side of button)
  
  
• CMYK color (most accurate color printing)
  
  
• Must be in a PC format (.ai, .eps, .pdf)